The 50 mm profile offers lots of opportunites like ambiance lighting in white or RGB, freestanding mounting, outdoor use, and the usage of a unlighted banner at its backside. Sizes are limited to either 4000 x 1500 mm or 2000 x 2000 mm. In historic perspective: in 2010 the LFF50 was the first LED enlighted textile frame developed by Laserworks and all subsequent designs were derived from it.
Depth:
|
50 mm
|
Application:
|
indoor, at request outdoor
|
Design:
|
single sided illuminated, unlit backside, optional ambiance lighting
|
Size:
|
maximum 4000 x 1500 mm / 2000 x 2000 mm
|
Mounting:
|
wall mounted or freestanding, mounting brackets included, power supply external
|
Delivery:
|
size dependent assembled or delivered in 2 pre-installed parts
|
Print:
|
rubber lip sewed to printed banner, suggested backlit textile like ‘Pearl Lightbox’ 130 gr/m²
|
Lighting:
|
cast acrylic sheet (PMMA) with optmized laser engraved dot pattern, edge lit by LED strips
|
LED:
|
SMD, at flexible PCB
|
Lifetime:
|
50.000 hours (L70)
|
Illuminance:
|
standard ca 2000 lux, higher brightness available
|
Light color (CCT):
|
standard daylight white ca 6500K, other colours on request available
|
Flammability class:
|
DIN 4102-1: B2; NEN-EN 13501-1:E
|
Optionally dimming:
|
turnkey dimmer, remote control (RF), DMX or DALI
|
RGB:
|
possible with RGB controller, remote control (RF), DMX or DALI
|
Profile:
|
aluminium hollow-chamber profile
|
Color profile:
|
standard anodized aluminium (EV1); RAL colors available as matted (30% gloss), silk (70% gloss, standard) or glossy (85% gloss)
|
Position of cable exit:
|
centered in short size, exit at back or sideway profile
|
Power supply:
|
Mean Well GS series, with black C13-Schuko cable (IEC320); PLN and HLG series + Wieland plug available at charge
|