LFF20

With a depth of only 20 mm, the LFF20 is the slimmest illuminated banner frame available. We advise this frame with a size up till 2500 x 1000 mm. If the dimensions exceed this size, the frame will be fragile which increases risk on damage with transport and mounting. Then it is case dependent whether the LFF20 profile can be used. Please contact us for a solution.

Depth:
20 mm
Application:
indoor
Design:
single sided illuminated
Size:
maximum 2500 x 1000 mm, others on request
Mounting:
wall mounted, mounting brackets included, power supply external
Delivery:
assembled
Print:
rubber lip sewed to printed banner, suggested backlit textile like ‘Pearl Lightbox’ 130 gr/m²
Lighting:
cast acrylic sheet (PMMA) with optimized laser engraved dot pattern, edge lit by LED strips
LED:
SMD, at flexible PCB
Lifetime:
50.000 hours (L70)
Illuminance:
standard ca 2000 lux, higher brightness available
Light color (CCT):
standard daylight white ca 6500K, other colours on request available
Flammability class:
DIN 4102-1: B2; NEN-EN 13501-1:E
Optionally dimming:
turnkey dimmer, remote control (RF), DMX or DALI
RGB:
possible with RGB controller, remote control (RF), DMX or DALI
Profile:
aluminium hollow-chamber profile
Color profile:
standard anodized aluminium (EV1); RAL colors available as matted (30% gloss), silk (70% gloss, standard) or glossy (85% gloss)
Position of cable exit:
standard at back, centered in short size; sideways profile exit possible at charge
Power supply:
Mean Well GS series, with black C13-Schuko cable (IEC320); PLN and HLG series + Wieland plug available at charge