LFF100DS-PL

The double sided 100 mm profile is a cost efficient way to enlight large displays. The profile is designed for double sided illumation with edge mounted Power LED modules. Single sided illumnation can be achieved by using a white block out banner in one side. With monochrome images, the Power LEDs can be a little visible. The 180DS profile avoids this, but is heavier and more expensive.

Depth:
100 mm
Application:
indoor
Design:
single or double sided illuminated
Size:
maximum 4000 x 2000 mm
Mounting:
ceiling mounted , freestanding at footplates, or with drilled holes to your specification
Delivery:
assembled or as mounting kit with pre-installed LED modules
Print:
rubber lip sewed to printed banner, suggested backlit textile like ‘Pearl Lightbox’ 130 gr/m²
Lighting:
edge mounted power LED modules with special lenses (narrow beam)
LED:
high power LED at rigid aluminium bar (24V, per module 12W and ca 800 lumen)
Lifetime:
50.000 hours (L70)
Illuminance:
size dependent ca 2000-4000 lux (on average ca 3000 lux)
Light color (CCT):
daylight white ca 6500K
Flammability class:
DIN 4102-1: B1
Optionally dimming:
under development
RGB:
under development
Profile:
aluminium hollow-chamber profile
Color profile:
standard anodized aluminium (EV1); RAL colors available as matted (30% gloss), silk (70% gloss, standard) or glossy (85% gloss)
Position of cable exit:
according to requirements without charge
Power supply:
Mean Well GS series, with black C13-Schuko cable (IEC320); PLN and HLG series + Wieland plug available at charge