Forget old-skool lightboxes with building depths of 150 or 200 mm. The new LED Box 50 sets a new standard with only 50 mm thickness, enable by the application of our laser engraved LED panels. The framework around of 20 mm holds printed acryl plates or acryl plates with foil layout. The application is both indoor and outdoor. One or more sides can be partially removed to place or exchange the acryl plate.
Depth:
|
50 mm
|
Application:
|
indoor or outdoor
|
Design:
|
single sided illumination of acryl plates 3-5 mm
|
Size:
|
indoor maximum 3000 x 1500 or 2000 x 2000 mm, outdoor maximum 4000 x 800 mm
|
Mounting:
|
wall mounted, external power supply
|
Delivery:
|
assembled
|
Print:
|
layout on 3-5 mm acryl plate, with foil or directly printed
|
Lighting:
|
cast acrylic sheet (PMMA) with optimized laser engraved dot pattern, edge lit by LED strips
|
LED:
|
SMD, at flexible PCB
|
Lifetime:
|
50.000 hours (L70)
|
Illuminance:
|
standard ca 2500 lux, higher brightness available
|
Light color (CCT):
|
standard daylight white ca 6500K, other colours on request available
|
Flammability class:
|
DIN 4102-1: B2; NEN-EN 13501-1:E
|
Optionally dimming:
|
dimmable at power supply with internal potentiometer, PMW / 0-10V, DMX or DALI
|
RGB:
|
small sizes possible with RGB controller, remote control (RF), DMX or DALI
|
Profile:
|
aluminium hollow-chamber profile
|
Color profile:
|
standard anodized aluminium (EV1); RAL colors available as matted (30% gloss), silk (70% gloss, standard) or glossy (85% gloss)
|
Position of cable exit:
|
situated at the back, centered on short side; or sideways profile at requested position
|
Power supply:
|
Mean Well PLN and HLG-series, (with MM and EN 61347 certification), + Wieland plug available at charge
|